Advin Programmer Logo

Universal Programmer,
EPROM Programmer

Programmers Home Programmer Adapter IC Programming Services.jpg How to do EPROM Programming

How to Use
SA001A PLCC-20 Programmer Adapter

How to use DX2020 PLCC programmer adapter

To load a device:
1. Place device with top facing down (i.e. so called dead-bug). Orient it with pin 1 facing away from user (unless software specifies otherwise).

2. Must make sure device is aligned squarely and is horizontal.

3. Push it down in the middle, gently, do not force. If you cannot push it down gently, the device may not be aligned squarely, or may not be in a horizontal position.
How to use SA001A programmer adapter

Device loaded.
How to use SA001A auto-eject adapters

To un load a device:

Push down on the top edges of socket with a fast action.

SA001A auto-eject programmer adapter

Device will be ejected..

Sales email:
Support email:
Office hours: 8AM to 5PM, California Time.