UNIVERSAL PROGRAMMER HIGHLIGHTS
Supports 75,000+ IC devices from 350+ IC chip manufacturers.
Capable of stand-alone operation (requires optional CF card)
Supports low voltage chip types with Vcc as low as 1.2v.
High programming throughput
USB 2.0 high-speed PC interface
Programmer-control S/W supports XP / Vista / Windows 7, 8 and 10
CE and RoHS compliant
|
UNIVERSAL PROGRAMMER FEATURES
|
IC CHIP DEVICE SUPPORT
Supports 75,000+ IC devices from 350+ IC chip manufacturers.
IC device types supported include:
FLASH memory, EPROM, EEPROM, Serial EEPROM, FPGA Configuration
Serial PROM, NVRAM, PAL, PLD, CPLD, EPLD, NAND Flash,
Microcontroller, PIC Micro, Logic Devices, etc.
Supports a wide variety of surface-mount devices (SMDs) and
other IC device packages with reliable factory-made adapters.
Packages supported include:
PLCC, CLCC, SOIC, LAP, DFN, QFN, QFP, TQFP, LQFP, PAFP, TSOP, SOP, SSOP,
PSOP, TSSOP, SON, BGA, EBGA, FBGA, VFBGA, µBGA, etc.
Free software updates can be downloaded via internet at any time.
PROGRAMMER SPEED
Ultra fast programming speed via USB interface.
Programs high-density flash memory chips at near-theoretical
maximum programming speed.
The Production Mode feature allows programming to start automatically
as soon as a chip is loaded into the programming socket.
ADVANCED UNIVERSAL PROGRAMMER HARDWARE
Advanced hardware design provides clean signals and
allows programming of low-voltage chips reliably.
The programmer has 144 universal pin-drivers built-in.
There is no need to add additional or optional pin-drivers
even when you are programming large complex chips, up to 144-pins.
(As long as you have the proper SMD-to-programmer adapters.)
Since each pin-driver is software programmable, proper voltage
levels will be applied to each and every pin, not just the Vcc pins,
allowing true low-voltage programming for low-voltage chips.
Reverse insertion check and pin continuity check help to
prevent chips from accidental damage.
Over-current and over-voltage protection ensures safety of the
chips and programmer hardware.
EASY-TO-USE UNIVERSAL PROGRAMMER SOFTWARE
Programmer-control S/W supports XP, Vista, Windows 7, 8, 10.
User-friendly software allows you to do these and more easily:
- Read data from a master chip, put it in the data buffer
- Save the data to a file
- Program a new chip with this data
- Erase a used EE chip before program it
- Secure the chip so that others cannot copy it
- Load data from a file instead of from a master chip
- Display the data buffer and allow you to edit it
- Search the data buffer for a certain pattern
- Do an AUTO sequence such as [Erase, Program,
Verify and Secure] with just one click
- Plus a whole lot more
ADVANCED SOFTWARE FEATURES
Advanced functions allow you to do things that would be
impossible to do with lower level programmers or competing products.
These include::
- The Project function allows you to store settings such as
IC chip manufacturer, chip selection, data filename, device configuration,
programming options, etc., into different project files.
- Data splits: 1-to-2, or 1-to-4, for
both byte-wide and word-wide memory chips.
- Byte swap: for Intel or Motorola byte arrangements
- Optionally do write-protection on selected sectors
- Optionally do read-protection on selected blocks
- Do specific device configurations for
Microchip PIC micros
- Setup counters so that your operator can
easily keep track of how many chips have been
programmed.
- Plus a whole lot more
FLEXIBLE MULTI-MODE OPERATIONS
Convenient PC-controlled mode, via high speed USB 2.0, lends to easy
operation for the R&D and engineering environment.
Stand-alone operation is provided by a built-in 6-key keyboard and a
4-line LCD display.
(SD memory cards are used for storing programming algorithms
which are downloaded from PC to programmer. Once the programming algorithms
and data files are stored in an SD memory card, the programmer can
be operated without connection to a PC.)
Built-in LEDS and the LCD display panel help to increas through-put in
production mode.
|
How the
LEDs work
|
USEFUL AS A PRODUCTION PROGRAMMER
Putting multiple units together in stand-alone mode
creates a multi-site concurrent programming environment for volume
production. The advantages, over a traditional
gang programmer, are:
Flexible and expandable: start with one unit and expand by adding more
units when the need arises.
Concurrent programming: each programmer begins to program as soon
as its socket has been loaded. Chances are, by the time you finish loading
the last programmer, the first one is already done.
|
UNIVERSAL PROGRAMMER SPECIFICATIONS
|
IC CHIP DEVICE SUPPORT
Chip Packages Supported with Optional SMD Adapters:
PLCC, CLCC, SOIC, LAP, DFN, QFN, QFP, TQFP, LQFP, PQFP, TSOP, SOP, SSOP,
PSOP, TSSOP, SON, BGA, EBGA, FBGA, VFBGA, µBGA, etc.
IC CHIP DEVICE UPDATES
Software and chip programming algorithms are updated regularly.
Current software can be downloaded free of charge
HARDWARE & ELECTRICAL
PC interface: High speed USB 2.0
AC power supply: Input 100V-240V AC, 50/60 HZ.
Output 12VDC, 2 Amp.
Programmer physical size: 8.5" x 5.8" x 4.75" high
(216 mm x 149 mm x 120 mm)
Net weight (programmer unit, AC power supply and USB cable):
4.4Lbs.
Gross shipping weight: 9 Lbs.
WARRANTY
2-years. Programmer is warranted to be free of manufacturing
or workmanship defects for two (2) years from the date of purchase.
Warranty covers parts, labor, and free UPS ground shipping from
Advin back to customer. (Free ground shipping applies to 48-states
and Canada only).
INCLUDED ITEMS
Programmer.
AC power supply.
Durable storage and carry case.
USB Cable.
Programmer-control software CD.
User's Guide as a file on CD.
User-feedback form.
Back View
|
Programmer Carry case
|
Carry case inside view
|
USB cable
|
AC Power Supply
|
SD card for stand-alone operation
|
OPTIONAL ITEMS
SMD to programmer adapters for different SMD device packages such as SOIC, PLCC, TSOP, etc.
Please see
SMD to Programmer Adapters
|
